Tuesday, July 23, 2013

Guidelines To Fix The Errors In Windows Registry

Windows registry is one of the most important databases that Microsoft uses to operate Windows operating system. This has been in use since Windows 98 and is still on the run due to its exceptional algorithm. This is basically used to store hardware configuration information and operating system data. As such, Windows applications and operating systems constantly refer the registry for information. Any issues encountered with the register can inflict a series of havoc on your computer. However, at the same time, this may go unnoticed for a certain period, which is more dangerous. Over time, users will not be able to perform routine Windows functions and open applications.
Please be advised that the registry is extremely sensitive. This means that a small error could send you back to Stone Age. The corruption can be due to viruses, improper install and improper shutdown of Windows. This can also be caused due to hardware failure. Let us see how we can get around this problem and save ourselves!

Microsoft registry repair instructions to solve the issues

• To begin with, you need to determine the intensity of the registry error and the exact cause of the error. As mentioned earlier, this might be due to a variety of reasons. As such determining the issues can be extremely difficult or simple.
• If you are encountering the error while starting an application, it is safe to believe that the application might have gone rouge. In certain cases, you may continuously receive general memory errors.
• This can be attributed to the hardware corruption. Improper software management is one of the simplest reasons for encountering the registry errors. To proceed with the troubleshooting steps, you need to isolate the error.
• If you are unsure about the exact cause of the error, you will have to dig in deep and find the issue. The best option is to write down the exact error on a paper. Research and find out the articles on the causes of the error you are encountering.
• The best option is to search the internet for this. After determining the error, you need to fix the situation. For this, you can use the Microsoft registry repair tool.

Now that you know the initial step, please go ahead and collect more information about the same. Have a great day folks! Good luck!

Tuesday, July 16, 2013

How To Fix Outlook Express Email Issues

With Microsoft’s Outlook Express program, you can send and receive a plethora of emails in a single go making your work simple and easy. However, there are times when the Outlook Express program stops working the way it should be working. One such problem is when you try to download an email message and it just will not work. Well, you can fix these kind of Outlook Express email problems in a jiffy, thanks to these instructions from our tech support team. Let us see how.

Configuring Email Account Settings

You can begin the procedure by launching the Outlook Express program installed on your computer. For this, you need to click on the Windows Start menu located on the left side bottom corner of your computer screen and then choose the icon that is labeled by All Programs from the list of Start menu options. After that, click on the icon named Outlook Express.
Now, in the Outlook Express window, you need to click on the Tools menu followed by the Accounts option.
Next up, you need to choose the email account you want and click on Properties.
Once you do that, you need to click on the Servers option and confirm that the configurations for Incoming Mail, Outgoing Mail, Account Name, and Password are correct. You can get this information from your web-based e-mail provider.
Following which you need to click on the Advanced option in order to make sure that the Outgoing and Ingoing server port numbers are right for the email account that you have provided.
When you are done with the settings, you need to click on the OK button. After that, press the Send/Receive button for getting the new messages.
Fixing Network Connection Problems
For this, you need to right-click on the network icon that is located next to the system clock and then click on the option that reads Diagnose and Repair. Almost every connection problem will be fixed by this software.
You must also make sure that the network connections are physically enabled. Please note that you need to ensure that the router’s cable is properly plugged in and turned on in case you are using a desktop computer.
Now, that is it! By now, you must have successfully fixed the Outlook Express email problems that you have been experiencing. For any further details, please get in touch with our tech support team.

Tuesday, July 9, 2013

How To Hide An Object Before Animation In PowerPoint

Microsoft PowerPoint 2010 allows you to create individual slides and present them in a slide show. Each slide can contain a number of objects, including images, tables, SmartArt or shapes, which you can then animate so that they move around the screen while the slide is on the screen. Sometimes, one object may interfere with the animation of another object. To get around this issue, you will have to have the first object fade out before the animation for the second object begins.
The guidelines that you have to follow, recommended by the efficient Microsoft tech support team that you have to follow in order to hide an object before animation in PowerPoint are given below. The animations for PowerPoint are quite useful and they will be of great help to you in certain situations.

Instructions to hide an object in Microsoft PowerPoint 2010

  • Launch the Microsoft PowerPoint 2010 presentation that you want to work with. Select the slide that contains the object you want to hide from the list of slides on the left side of the PowerPoint window.
  • Click on the object that you want to hide before the animation plays.
  • Click the Animations tab at the top of the screen. Click the Add Animation button on the ribbon. Select any of the animations under the Exit heading, as these will all result in the object disappearing.
  • Select the Move Earlier button in the Reorder Animation area of the ribbon. This will move your exit animation before your other animation on the screen. You will see a 1 appear next to the new object, and a 2 appear next to the old animated object.
  • Click on the 2 to select the old animation. Click the drop-down menu next to Start in the Timing area of the ribbon. Choose After Previous from the menu. Your animation will now automatically play as soon as the object becomes hidden.

These are the instructions provided by the excellent and ever reliable Microsoft tech support team that you have to follow in order to hide an object before animation in Microsoft PowerPoint program. The instructions that are given here are simple and easy to follow and you should be able to resolve these issues within a matter of minutes. The animations for PowerPoint is a useful feature and you can use it for various purposes.

Microsoft Xbox 360 Headset Issues Resolved

Microsoft Xbox 360 is one of the most popular gaming consoles in the market. Although it has had to face stiff competition from the likes of Sony, this product has managed to keep its popularity intact. The wireless headset for the Xbox 360 allows you to communicate verbally with other players over Xbox live. The headset has an earpiece that allows you to hear other players and a microphone so that you can speak to them in real time. The headset has an internal rechargeable battery and, like many electronics, is sensitive to environmental conditions. Troubleshooting the headset can be done without any special knowledge or tools. However, you would need some directions, which is provided by the support team.
The guidelines that you have to follow in order to resolve the Microsoft Xbox 360 wireless headset issues are given below. These guidelines have been provided by the excellent Microsoft chat support team and as such they are reliable.
Instructions to follow

  • First of all, click on the Power button located on the headset to turn it off and on a few times. Between each press, wait a few seconds to see if the status light turns on. If the headset does not turn on, proceed to Step 2.
  • Disconnect the headset from its charger if it is connected. Place the headset in a cool and dark area until the device is cool to the touch. Very warm temperatures can cause the headset to malfunction. If the device is in an extremely cold area, place it in a room-temperature area until the device does not feel cold to the touch.
  • Reconnect the headset to the charger cable and allow it to charge for at least six hours or overnight. The lights on the microphone section should flash in sequence while charging.
  • Wait until the lights on the microphone section begin flashing together at the same time before disconnecting the charger cable. Push down the Power button to turn on the headset.

These are the guidelines that you have to follow in order to resolve some technical issues with Microsoft Xbox 360 headset. These problems can be resolved quickly, with the help of these instructions provided by the Microsoft chat support and help team.

Monday, July 8, 2013

Tutorial To Enable Remote Desktop Sharing On Windows Computers

The Microsoft Windows operating systems allow desktop sharing, or connecting to another computer to view the remote computer's desktop, through the Remote Desktop application, which was formerly known as Terminal Services. In Windows 7 and Vista, the Remote Desktop feature must be enabled before the computer may be shared with other users.

Follow the set of guidelines given below, recommended by the efficient Windows online support team in order to enable remote desktop sharing on your computer.

Instructions to enable remote desktop sharing

  • First of all, click on the Windows Start button, which is displayed on the lower left corner of your Windows desktop screen. Clicking on this icon will open up the Windows Start Menu on your computer screen and you will be able to select the various options from it.
  • Right-click on the Computer button from the Windows Start menu, and then select the Properties option to configure the properties. The Computer Properties interface will now open on the screen of your computer.
  • Click on the Remote Settings button located in the left selection pane of your computer screen.
  • Click on the Remote tab displayed in the System Properties dialog box.
  • Click one of the two radio buttons displayed next to the Allow options in the Remote Desktop section of the dialog box. The first Allow option allows computers running any version of Remote Desktop to connect to the computer and is the less secure option. The second option allows computers running only Remote Desktop with Network Level Authentication, which is more secure. Select the first Allow option for home networks.
  • Click on the Select Users button, if you want to limit access to only one or a few users. The Users interface will open on the screen of your computer. Click on each user to allow and then click on the OK button.
  • Click on the OK button to save the settings and exit from the System Properties dialog box.

These are the set of guidelines that you have to follow in order to enable remote desktop sharing on your computer system. These simple instructions have been recommended by the efficient Windows online support team and you can follow them in order to enable remote desktop sharing on your computer.

How To Setup Microsoft Outlook On A Network

When using Microsoft Outlook with an Exchange account, PC users can share their contacts and address book with multiple computers and mobile devices. However, if you are running Outlook with a standard email account and not an Exchange account, you can still move your contacts to other locations. Many features in Outlook, such as the ability to share contact folders and calendars, require a connection to the Microsoft Exchange Server through your ISP network. Exchange Server is an email-based communications network for businesses. If you are looking to set up an Outlook account to an Exchange Server, contact your organization's help desk or network administrator for network details prior to configuring your Outlook mail. 
Follow the instructions that are given below, provided by the excellent Microsoft help desk if you want to set up the Microsoft Outlook program over a network.
  • First of all, click on the Windows Start button located on the lower left corner of your Windows desktop screen. Clicking on this Start button will open the Windows Start menu on the screen of your computer. From the Windows Start Menu, open the Control Panel window on your computer. Launch the Mail module from the Control Panel on your computer. Now, click on the Show Profiles button located under the Profiles section. Click on the Add button to add a new profile.
  • Enter a name for the profile, and then click on the OK button. Next, manually configure your Exchange account to connect it to the network.
  • Click on the Manually configure server settings or additional server types check box in order to put a check mark in it, and then click on the Next button. Choose the Microsoft Exchange option, and then click on the Next button.
  • Enter the name assigned to you by your IT or domain administrator for the server running Exchange. Next, type the user name assigned to you by your mail administrator. Click on the OK button.
These are the instructions that you should follow in order to set up Microsoft Outlook on a network. These guidelines have been provided by the excellent and ever reliable Microsoft help desk and these directions will help you in setting up Microsoft Outlook program over a network.

Monday, July 1, 2013

How To Copy Emoticons From Microsoft Word To Msn Messenger

Conveying your emotions solely through words is never easy, and might not always be possible. However Emoticons can help you with this to certain extend. They are nothing but cartoon faces with various expressions, which can be used to convey your feelings along with the words you type. They are most commonly used in various instant messaging and chat interfaces, like Microsoft chat or yahoo messenger.
You can get these emoticons to your MSN messenger from the Microsoft Word, which is quite a simple procedure. It can be used in Microsoft chat or yahoo messenger, as well as MSN and other instant messaging services.

Tips to Copy Emoticons from MS Word

  • Launch Microsoft Word and then open up a new word document or a blank page, and then choose the Insert option from the File menu, on top of the Word program.
  • From the insert option, choose the Symbol option. This will open up the windows Character map for you.
  • This character map will have a number of symbols and emoticons as well. Scroll through these and pick the emoticons of your choice, and once you find them, highlight them by simply clicking on them.
  • Once you have chosen them, select the Insert option, which will insert these emoticons in to the Word document.

Once you have inserted the emoticons in to the Word document, half of your work is over. Here is how you can insert these emoticons in to MSN messenger.
  • In order to select these emoticons, highlight them in the Word document, and while holding down the Ctrl button of your keyboard, press the C button.
  • Or, if you find this difficult to do, you can simply right click on the highlighted emoticons and then from the options in the popup menu, choose the Copy option.
  • Open the MSN chat messenger after minimizing the Word document. Click on the text field that is meant for typing in messages in the chat. Press the Ctrl and V buttons simultaneously to paste the emoticons that you have copied from the word document in to the text field.

Alternatively, right-click in the text field and select the Paste option from the popup menu.
These are the steps with which you can paste an emoticon from Word to MSN messenger. Use the above steps to your benefit.